Ambalica Engineers, a fast growing company in the field of pharmaceutical machinery
which was established in 1992 at Ahmedabad in Gujarat state of India.

Get In Touch

Vial Filling & Stoppering Machines

The incoming dry vials (sterilized and siliconised) are fed through the in-feed turn table and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit.  The filling unit consists syringes & nozzles uses for the filling.    The  vials in a raw are stopped under the filling nozzles by the starwheel rotating indexing mechanism for filling operationand move further to stoppering station for stoppering operation.

Technical Specifications:

Model MAVLF-60 MAVLF-120 MAVLF-150 MAVLF-200
No. of Heads 2 Nos. 4 Nos. 6 Nos. 8 Nos.
Output/Minute 30 to 70 Vials 60 to 120 Vials 80 to 200 Vials 80 to 200 Vials
Fill Size * 2ml to  100ml  (With the help of change parts)
Fill Accuracy ±1%
Input Specifications  
Container Dia. 16mm to 52mm
Container Height 25mm to 110mm
Rubber Stopper 13mm & 20mm Grey Butyle

The incoming dry vials (sterilized and siliconised) are fed through the in-feed turn table and suitably guided on starwheel and moving sprocket at required speed for the correct placement below filling unit.  The vials travelling in sprocket below the filling station continuously and during vial transportation nozzles also move along with vials simultaneously and discharge pre-determined liquid into the vials. Duly filled vials are further moved towards the stoppering unit which is mounted on same platform.

Technical Specifications:

Model Motion-4 Motion-6 Motion-8
No. of Heads 4 Nos. 6 Nos. 4 Nos.
Output/Minute 80 to 150 Vials 80 to 200 Vials 80 to 250 Vials
Fill Size * 2ml to  100ml  (With the help of change parts)
Fill Accuracy ±1%
Input Specifications  
Container Dia 16mm to 52mm
Container Height 25mm to 110mm
Rubber Stopper 13mm & 20mm Grey Butyle