Ampoules feed from the Infeed tray are received on an Infeed Feedworm then moves on Infeed starwheel. The Grippers picks up the Ampoule from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed Ampoules are again inverted to neck upward position and feed to output star wheel. Washed Ampoules received from output starwheel can be collected on Output Tray or can be pushed to tunnel.
AUTOMATIC ROTARY AMPOULE WASHING MACHINE
MODEL: ARAW-120
Technical Specifications:
Machine Model |
ARAW-120 |
|
No. of Water Tank & Pump |
2 Nos. Each of 25 litres capacity with Centrifugal pump |
|
Washing Needle |
36 Nos. For Inner Wash and 9 Needles for Outer Wash |
|
Washing zone |
6 (six) |
|
Water consumption |
200 to 550 liters (depends on ampoule size) |
|
Utility |
Compressed Air supply: Filtered Air at 6 bar for instrumentation sterile filtered air (0.01um) at 5 bar (To be provided by Customer) |
|
Filters (Optional) |
For Re-circulation Water |
Acrylic Filter Housing with 10 um Cartridges |
For D.M. Water |
Acrylic Filter Housing with 5 um Cartridge |
|
Output/Minute |
Upto 120 Ampoules |
|
Working direction |
Left to Right |
|
Electric Characteristic |
Main Motor |
5 HP/230V/1440 RPM/Single Phase/50 Hz |
Recirculation Water pump |
0.75 HP |
|
D.M. Water pump |
0.75 HP |
|
Power Supply |
Single Phase/3 Phase, 4 Wire |
|
Input Specifications |
1ml to 10ml Ampoules |
|
Overall dimensions |
2450mm (L) x 2000mm (W) x 1300mm (H) |
|
Working height |
900mm to 950mm adjustable |
|
(The above specifications may change with the inclusion of latest technologies)